Scheda Tecnica / Technical Data Sheet
30 FC TF3 PA 66 30% CARBON FIBER PTFE LUBRICATED

Physical & Thermal

Physical & Thermal

Method Unit Value
DensityISO 1183g/cm³1,38
Melting PointDSCºC260
Mold Shrinkage (average)ISO 294-4%0,3 - 0,5
Moisture Absorption (water immersion 23ºC) 24hISO 62%1,3 - 4,5
Vicat Softening Temperature B 9,8 NISO 306ºC260
Heat Deflection Temperature 0,45 MPaISO 75-2ºC255
Heat Deflection Temperature 1,81 MPaISO 75-2ºC245
Continuous Service Temperature (without load)IEC 60216ºC120
Heat Resistance - Ball Pressure testIEC 60695-10-2ºC> 165

Mechanical

Mechanical

Method Unit Value
Tensile Strength at BreakISO 527MPa170
Tensile ModulusISO 527MPa18000
Tensile Strain at YeldISO 527%-
Tensile Strain at BreakISO 527%2
Izod - Notched Impact StrengthISO 180/AkJ/m²9,5
Izod - Unnotched Impact StrengthISO 180/UkJ/m²40

Electrical & Flame Retardancy

Electrical & Flame Retardancy

Method Unit Value
Coefficient of Friction - StaticASTM D 3702
0,26
Coefficient of Friction - DynamicASTM D 37020,2
Wear RateASTM D 3702
15
Volume ResistivityIEC 60093Ω*cm1 E3
Flammability 3,0 - 1,5 - 0,8 mmUL 94-
Glow Wire Ingnition Temperature (GWT) GWIT / 2 mmIEC 60695-2-13ºC650
Burning Rate 350 X 100 X 1 mmFMVSS 302 ISO 3795mm/minBR < 100

Molding conditions (suggested)

Molding conditions (suggested)

Method Unit Value
Drying TemperatureºC80-90
Molding temperatureºC265-275
Mold temperatureºC70-80

Edizione del / Issue 30/10/2020

Le informazioni contenute in questo documento vengono fornite in buona fede e con scopo puramente indicativo da valutare attentamente in funzione delle esigenze progettuali. Prodotto non idoneo per applicazioni alimentari e/o medicali se non diversamente indicato. Non deve essere considerato in alcun caso come un vincolo contrattuale o garanzia da parte nostra, specialmente in caso di utilizzo improprio dei nostri prodotti da parte di terzi.
The information contained herein are supplied in good faith and given purely as an indication. Properties should be carefully evaluated for all projects’ requirements. Unless otherwise specified, this product is not suitable for food and/or medical application and use. They shall not be considered in any way as a formal commitment or warranty from our company, especially in case of improper use of our products from third parties.

Documentazione

Technical Datasheet